Welcome to the Workshop 12 family. 🤘
Below is your step-by-step installation guide, designed to walk you through everything from wiring and setup to troubleshooting. Please follow each step carefully. If you run into an issue that isn't covered here, scroll to the bottom of the page to reach out via email, phone, or by booking a 1-on-1 video call.
STEP 1: Understanding the wiring - What's needed?
Note:
-
The Maserati Climate Display Module has been updated to work without an additional CanBus box. It now simply plugs into the factory climate plug.
STEP 2: Installation
Before You Begin — Tools & Preparation
- Gather basic interior trim tools (plastic pry tools), a screwdriver set, and optionally a socket (commonly 10 mm) or hex key.
-
Disconnect the negative battery terminal to prevent electrical faults or airbag warnings.
-
Confirm that your kit includes the correct vehicle-specific plug-and-play wiring harness, antennas, and accessories.
Step 1: Remove the Factory Infotainment Screen
-
Use plastic trim tools to gently pry off the surrounding dash trim.
-
Remove mounting screws that secure the factory screen.
-
Pull the unit forward carefully.
-
Disconnect all factory wiring connectors and antenna plugs from the back.
Step 2: Connect the Plug-and-Play Harness
-
Take the Workshop 12 harness and connect it directly to the vehicle’s OEM plug that was removed from the factory screen.
-
Attach all required accessories from the kit:
-
GPS antenna
-
LTE/4G antennas (if included)
-
External microphone harness
-
Step 3: Mount the New Screen
after taking out the factory screen you'll unscrew everything and switch our screen into the mount
-
Align the new ultra wide screen into the dash opening.
-
Secure it using factory mounting points or provided screws.
-
Reinstall the trim panel, pressing evenly so all clips seat correctly without forcing them.
Software Walkthrough
Additional Resources for Below:
Need Extra Help? Book a 1-on-1 Video Call
If you have an issue that hasn't been covered, or if you just prefer a guiding hand, you can schedule a live troubleshooting and setup session with a Workshop 12 technician.
Book your 1-on-1 Video Call by clicking this link 👉 BOOK NOW
Don't see a time that works?
Simply email us at info@workshoptwelve.com with two preferred dates and times, and we’ll do our absolute best to accommodate your schedule.
Contact us:
