Ford Mustang 2015-2021 NON-SYNC Full Installation

Quick Guide — Workshop 12 Tesla‑Style 14.4″ Screen Install (Ford Mustang)

Step‑by‑Step Installation

1. Remove Factory Dash Screen

   • Use trim removal tools to gently pry off factory trim around the existing stereo.

   • Unplug the OEM head unit (antenna, FIT, camera connectors, power harness).

2. Prepare the New Screen Assembly

   • Unbox the Workshop 12 14.4″ screen.

   • Identify included harnesses:

     • Plug‑and‑Play stereo harness

     • GPS antenna

     • Wi-Fi / LTE antennas

     • Microphone lead

     • Any necessary mounting brackets.

3. Install Mounting Bracket

   • Secure the custom mounting bracket into the dash.

   • Ensure the bracket is oriented per instructions, so the screen will sit flush.

4. Connect Wiring Harness

   • Connect the plug‑and‑play stereo harness to the factory harness:

     • This typically includes power, ground, speakers, and CAN bus integrations.

   • Attach additional antenna and accessory connectors (Wi-Fi, MIC, GPS).

5. Fit the Screen Into the Dash

   • Slide the Tesla‑style screen into the dashboard opening.

   • Confirm all wiring remains tucked and not pinched.

   • Snap the trim back into place.

6. Reconnect Battery & Power Up

   • Reconnect the negative battery terminal.

   • Start the vehicle and allow the new head unit to power up.

7. Initial Setup & Calibration

   • Configure settings such as:

     • Wireless Apple CarPlay / Android Auto setup

     • Bluetooth pairing

     • Sound calibration

     • Steering wheel control functions (if supported).

8. Final Checks

   • Verify:

     • Factory camera and reverse trigger function

     • Climate control display integration

     • Radio and media playback

     • Touchscreen responsiveness